Cara menghubungkan tiga computer menggunakan hub/switch

1) Power saklar. Connect all the PCs to the switch with standard network cables. Hubungkan semua PC ke switch dengan kabel jaringan standar.

2) Put all the computers in the same workgroup: 2) Masukkan semua komputer dalam workgroup yang sama:
- On each PC, right-click "My Computer" - Pada setiap PC, klik-kanan "My Computer"
- Click "Properties" - Klik "Properties"
- Go to the "Computer Name" tab - Buka tab "Computer Name"
- Click "Change" at the bottom - Klik "Change" di bagian bawah
- Under "Member of" put a tick next to "Workgroup" - Di bawah "Anggota" menempatkan tanda centang di sebelah "Workgroup"
- Type in a name for the workgroup (use this name of each PC) - Ketik nama untuk workgroup (menggunakan nama masing-masing PC)

3) Give all the computers IP address in the same subnet. 3) Berikan semua alamat IP komputer di subnet yang sama.
Example: Contoh:

PC 1: PC 1:
- IP: 192.168.0.10 - IP: 192.168.0.10
- Subnet Mask: 255.255.255.0 - Subnet Mask: 255.255.255.0

PC 2: PC 2:
- IP: 192.168.0.11 - IP: 192.168.0.11
- Subnet Mask: 255.255.255.0 - Subnet Mask: 255.255.255.0

PC 3: PC 3:
- IP: 192.168.0.12 - IP: 192.168.0.12
- Subnet Mask: 255.255.255.0 - Subnet Mask: 255.255.255.0

PC 4: PC 4:
- IP: 192.168.0.13 - IP: 192.168.0.13
- Subnet Mask: 255.255.255.0 - Subnet Mask: 255.255.255.0

To do this, on each computer: Untuk melakukan hal ini, pada setiap komputer: 

- Open Start > Control Panel > Network Connections - Buka Start> Control Panel Network Connections>
- Right-click "Local Area Connection" - Klik kanan "Local Area Connection"
- Under "This connection uses the following items" select "Internet Protocol (TCP/IP)" and click the "Properties" button - Di bawah "Koneksi ini menggunakan item berikut" pilih "Internet Protocol (TCP / IP)" dan klik tombol "Properties"
- Put a tick next to "Use the following IP Address" and type in the IP and subnet mask from above. - Pasang tanda centang di samping "Gunakan Alamat IP berikut" dan ketik IP dan subnet mask dari atas.
- There is no default gateway because your workgroup is not connected to a router. - Tidak ada gateway default karena workgroup Anda tidak terhubung ke router. You also do not have a DNS server, so you will have to browse the workgroup by IP addresses and not by computer names. Anda juga tidak memiliki server DNS, sehingga Anda akan harus menelusuri workgroup dengan alamat IP dan bukan dengan nama komputer.

cabz0r: Heh, we have really similar answers. cabz0r: Heh, kami memiliki jawaban benar-benar sama